Glazed Roll Forming Machine

The Glazed Roll Forming Machine is divided into three parts, the roller forming part, the pressing part and the cutter part. The roller forming part of the Glazed Roll Forming Machine is driven by a motor, and the chain drives each roller to rotate. The pressing part of the Glazed Roll Forming Machine is a hydraulic cylinder that drives the mold to move up and down, which can press the colored steel into many sections, shaped like glazed tiles.

The cutter part of the Glazed Roll Forming Machine is a hydraulic cylinder that drives the cutter to move up and down, which can cut off the colored steel tiles. The production process of the Glazed Roll Forming Machine is as follows: the colored steel plate enters the roller forming part, and after being formed, it goes to the pressing part and is pressed into equidistant sections, and the cutter is responsible for cutting to a fixed length. Introduction to the control of Glazed Roll Forming Machine. The execution part includes a frequency converter drive motor, a hydraulic station motor, two hydraulic solenoid valves for pressing, and two hydraulic solenoid valves for the cutter.

The testing parts of the Glazed Roll Forming Machine include: pulse encoder for detecting the length of colored steel tiles, up and down travel switches for pressing, up and down travel switches for the cutter, up and down operation buttons for pressing, up and down travel buttons for the cutter, emergency stop switch, hydraulic start Stop switch and so on. The glazed tile equipment PLC uses KDN-K306-24AR of the KDN-K3 series. The Glazed Roll Forming Machine has 14 inputs/10 relay outputs, which just meets the input and output requirements. Equipped with KDN text screen, parameter setting, alarm display, help information, production data display, etc. can be completed.

Glazed Roll Forming Machine requires high-digital pulse input function. KDN-K306-24AR has excellent high-digital input performance, and the AB phase has good anti-interference ability. And use the fixed value interrupt function to determine the accuracy. The tile press has many parameters to be set, which can be set using the text screen. There are two types of Glazed Roll Forming Machine parameter settings: equipment parameters and user parameter settings. Equipment parameters include: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. The user parameters of the Glazed Roll Forming Machine include: number of sheets, length, first section, last section, pitch, number of sections, etc. The Glazed Roll Forming Machine control system can also complete the veneer cutting function.

Dongguang County Hengfu Roll Forming Machinery Co.,Ltd is a professional high-end cold roll forming equipment manufacturer integrating independent research and development, production, sales and service. Our company has long been committed to the development of cold bending and roll forming. Product quality is stable, cost-effective, excellent design engineers and good processing technology ensure the quality and performance of the equipment, and have passed various quality system certifications, and have a complete and scientific quality management system. The products designed and manufactured by us are not only sold well in China, but also exported to Southeast Asia, the Middle East,South America, North America, Europe and other countries and regions, and have won wide acclaim and praise!

Our company can produce various types of tile pressing machine products, and the roll forming plate types are diverse.

QC Profile

All the roll forming machines produced by our KYT Machinery have ourselves strict standard quality control process:

Parts Inspection

Machine Frames

Depends on roll forming machine’s size , we have 20#, 35#, 45# and may other bigger sizes H-beam for choise, after blasting and derusting, we weld each pieces of H-beam and then polish the weld place, finally paint whole roll forming frame together.

Rolling Shaft

45# forged steel or 40Cr, thermal refining and finishing lathe.

Forming Rollers

45# Steel,CNC lathes, fine polished, coat hard Chrome thickness 0.02-0.05mm for anti-rust and improve forming rollers'hardness. All the forming rollers will be spot inspected before installation.

Cutting Blades

The cutting blades material can be Cr12,C12Mov or SKD11 for our kinds of roll forming machines.Before cutting blades be installed on cutting frame, the hardness will be tested for ensure the using life.

Whole Roll Forming Line Inspection

Check the whole line each parts are on list or not at first, then adjust the roll forming machines to required dimensions to get correct roll forming samples, check the roll forming samples surface, dimensions according to design drawing, even two pieces sample joint effect. If not reached the required standard, the engineer will adjust whole machine to solve the problem together with our designer.