24 meters Tracked Aerial Work Platform

Lifting height: 24 meters

Lifting weight (high configuration): 8 tons

Height of roof panel: 4.5m--23m

Sheet materials used for roofs and wall panels: color steel sheets, galvanized sheets, aluminum sheets

Radius range of high-altitude tile press: ≤6000mm

Applicable molding machines: all Jiaochi series and roof panel molding machines, driven by motors and reducers, hydraulic shearing machines

Watt length: 1m——200m

Required voltage and power: 380V, 15KW

Thickness of roof and wall panel materials: 0.3mm--1.0mm

Specifications after installing the tile press: length × width × height: 12 meters × 2.9 meters × 4 meters

Hydraulic lifting platform weight: 29T

Outrigger cylinder (outrigger vertical plate extension): hydraulic cylinder outer diameter 180mm, rod diameter 130mm, a key part for safety, leading domestic configuration

Main arm cylinder: outer diameter 205mm, rod diameter 150mm, length 5000mm

Lifting platform main hydraulic oil pump: K3v63 plunger pump with high pressure and good stability

Oil pipe: High-pressure resistant four-layer steel wire first-level explosion-proof oil pipe

Valve block: domestic first-line brand with superior performance

Cylinder lock device: two-way use, with self-locking safety function

Computer control cabinet: stainless steel shell distribution box, touch screen for manual operation, Panasonic PLC, 18.5KW frequency converter

Height and angle controller: The display shows the actual height and angle;

Illegal operations include: restrictions, alarm prompt functions

Counting system: individual projects and total output can be set

Remote control: The entire vehicle including outrigger telescopic, support and lifting platform operations are all controlled by remote control

Solenoid valve: safe voltage 24V low voltage, durable, adaptable to complex working conditions

Oil pipe: seamless steel pipe processing

Fuel tank: professionally designed to prevent theft and splashing

Dual functions of the lifting system: the equipment can realize two lifting interchange modes of engine or motor

Steel plate steel: T700

Section steel steel: 355B

Telescopic boom: three sections

Platform specifications: small platform 2.3 meters × 9 meters

Outriggers: Total width after extension is 7m×7m

Shaft material: tempered and ground 45 steel, tempered and chrome plated

Shaft sleeve material: chromium steel material 20CrMo

Electric lifting hydraulic pump: high speed and large flow 2D28 type

Slewing support (high configuration): key parts of rotation that carry a weight of 30 tons, key parts for safety, double row ball slewing support

The equipment is equipped with an electric lifting device: to realize the hybrid function of oil and electricity, both electric and engine can be lifted and lowered.

Outriggers, leg boxes, and boom steel plates: 700L high-strength manganese steel plates

Drag chain: galvanized, steel

Dongguang County Hengfu Roll Forming Machinery Co.,Ltd is a professional high-end cold roll forming equipment manufacturer integrating independent research and development, production, sales and service. Our company has long been committed to the development of cold bending and roll forming. Product quality is stable, cost-effective, excellent design engineers and good processing technology ensure the quality and performance of the equipment, and have passed various quality system certifications, and have a complete and scientific quality management system. The products designed and manufactured by us are not only sold well in China, but also exported to Southeast Asia, the Middle East,South America, North America, Europe and other countries and regions, and have won wide acclaim and praise!

Our company can produce various types of tile pressing machine products, and the roll forming plate types are diverse.

QC Profile

All the roll forming machines produced by our KYT Machinery have ourselves strict standard quality control process:

Parts Inspection

Machine Frames

Depends on roll forming machine’s size , we have 20#, 35#, 45# and may other bigger sizes H-beam for choise, after blasting and derusting, we weld each pieces of H-beam and then polish the weld place, finally paint whole roll forming frame together.

Rolling Shaft

45# forged steel or 40Cr, thermal refining and finishing lathe.

Forming Rollers

45# Steel,CNC lathes, fine polished, coat hard Chrome thickness 0.02-0.05mm for anti-rust and improve forming rollers'hardness. All the forming rollers will be spot inspected before installation.

Cutting Blades

The cutting blades material can be Cr12,C12Mov or SKD11 for our kinds of roll forming machines.Before cutting blades be installed on cutting frame, the hardness will be tested for ensure the using life.

Whole Roll Forming Line Inspection

Check the whole line each parts are on list or not at first, then adjust the roll forming machines to required dimensions to get correct roll forming samples, check the roll forming samples surface, dimensions according to design drawing, even two pieces sample joint effect. If not reached the required standard, the engineer will adjust whole machine to solve the problem together with our designer.