Many customers don't know which one to buy when buying a roll forming machine. Each manufacturer says that their equipment is good, and customers don't know how to choose to buy it. Below we provide buyers and users with several points to consider when choosing a roll forming machine.

This is a brief introduction from several aspects below on how to choose a suitable roll forming machine?

1. Price. If the price of the roll forming machine is very low, the quality will definitely not be good, because no manufacturer can sell you the product at a loss.

2. Next, look at the workmanship of the machine as a whole. First, check whether the color of the spray paint is correct. If the color feels correct, it means that the paint used by this manufacturer is of good quality.

3. Next, check whether the materials used for the main plate and H steel meet the standards you require.

4. Another thing is to check whether each screw is of good quality.

5. Some equipment frames are welded, and some use H steel directly. H steel is more stable. The more important thing is to look at the electrical control system, because the electrical control system is very important, and every production link must be controlled and completed by it.

Speaking of the selection of raw materials for the production of roll forming machinees and the assembly level of workers, the purchase of raw materials determines the service life of the machine, and the manufacturing process and assembly level also determine the quality of the roll forming machine. The purchase of good raw materials and perfect manufacturing technology will make the equipment durable, non-deformable and of stable quality. The roll forming machineing machine assembled by experienced and skilled assembly technicians can ensure that the connection and tightening of each component are just right, such as the bearing position. Adjustment: The four jackscrews must be in place and not loose. Otherwise, if the jackscrew is too tight, it will reduce the service life of the bearings and the motor. If the motor is pulled hard, it will cause overcurrent and heat and burn the motor. If it is too loose, it will be transported over long distances. The bumps cause the front and rear upper and lower rollers to be misaligned, and the ridge lines of the produced color steel tiles will also be misaligned. They cannot meet the quality requirements and need to be readjusted before they can be used.