1150 Roll Forming Machine

1150 Roll Forming Machine adopts the lower five and upper four levels for leveling to ensure the flatness. It adopts the secondary molding method to determine the squareness and right angles of the product. It can be made in any size. The C-shaped steel produced by the equipment and the machine is square and the fastest in the industry. It also has the advantages of fast punching and fast cutting. 1150 Roll Forming Machine     will be equipped with a lubrication system. When the machine is running, it will automatically lubricate all load-bearing bearings, transmission gear mechanism movement guide rails and other parts. Automatic unloading and billet removal work procedures: Mold installation and host test run are the same as above, then start the air compressor, vacuum pump, extruder, tile cutting machine, unloading machine, car box plate machine, host and tile conveyor, and stop , stop the extruder first, and then stop other equipment.

1150 Roll Forming Machine uses automatic control software to realize production information management. The entire unit automation control system adopts a highly integrated network to improve the performance of the automation system. It also has the advantages of easy operation, maintenance, maintenance, mechanical debugging, and mold replacement.

1150 Roll Forming Machine is mainly used for the production of side panels, corrugated side panels and integrated side panels for cars, trucks and other carriages. The main structural features of 1150 roll forming machine include: the structure of 1150 roll forming machine is beautiful in appearance. Since the whole machine adopts an H-shaped steel structure and is processed as a whole after welding, the structure is simple and reasonable, with good storage capacity and smooth operation; The machine is easy to install and debug, and is suitable for factory production; the 1150-type tile press has low noise; the 1150-type tile press has high automation, fixed-length cutting, fixed-length positioning, beautiful and neat head and tail shapes, and is not easy to deform.

Technical parameters of 1150 type tile press:

1. The length of the equipment is 7600mm, the width is 1500mm, and the height is 1000mm;

2. The equipment power is 11 kilowatts and the hydraulic station power is 11 kilowatts;

3. The rollers are made of bearing steel (GR15), which is annealed after forging;

4. The base is made of 400H steel;

5. The width of rolled C-shaped steel is 80mm-1250mm;

6. Adopt new docking type adjustment steel sleeve, which is simple and convenient;

7. The thickness of rolled material is 1.5mm-3mm (the thickness can also be designed according to user requirements);

8. Rolling speed 8-9m/min;

Dongguang County Hengfu Roll Forming Machinery Co.,Ltd is a professional high-end cold roll forming equipment manufacturer integrating independent research and development, production, sales and service. Our company has long been committed to the development of cold bending and roll forming. Product quality is stable, cost-effective, excellent design engineers and good processing technology ensure the quality and performance of the equipment, and have passed various quality system certifications, and have a complete and scientific quality management system. The products designed and manufactured by us are not only sold well in China, but also exported to Southeast Asia, the Middle East,South America, North America, Europe and other countries and regions, and have won wide acclaim and praise!

Our company can produce various types of tile pressing machine products, and the roll forming plate types are diverse.

QC Profile

All the roll forming machines produced by our KYT Machinery have ourselves strict standard quality control process:

Parts Inspection

Machine Frames

Depends on roll forming machine’s size , we have 20#, 35#, 45# and may other bigger sizes H-beam for choise, after blasting and derusting, we weld each pieces of H-beam and then polish the weld place, finally paint whole roll forming frame together.

Rolling Shaft

45# forged steel or 40Cr, thermal refining and finishing lathe.

Forming Rollers

45# Steel,CNC lathes, fine polished, coat hard Chrome thickness 0.02-0.05mm for anti-rust and improve forming rollers'hardness. All the forming rollers will be spot inspected before installation.

Cutting Blades

The cutting blades material can be Cr12,C12Mov or SKD11 for our kinds of roll forming machines.Before cutting blades be installed on cutting frame, the hardness will be tested for ensure the using life.

Whole Roll Forming Line Inspection

Check the whole line each parts are on list or not at first, then adjust the roll forming machines to required dimensions to get correct roll forming samples, check the roll forming samples surface, dimensions according to design drawing, even two pieces sample joint effect. If not reached the required standard, the engineer will adjust whole machine to solve the problem together with our designer.