-Dongguang County Hengfu Roll Forming Machinery Co.,Ltd

Cable Tray Roll Forming Machine

The cable tray forming machine adopts a double-sided cantilever structure, and the punch press completes the punching and cutting of the annular ribs or different hole types at the bottom of the bridge. The sheet of material is fed into the molding host from the feeding table. Through electrical control, it can automatically move and adjust to produce bridge products of different widths and heights.

Cable tray forming machine test before operation:

1. Test and inspect the operating conditions of the balance cylinder of the cable tray forming machine and its oil lubrication system oil circuits and joints.

2. The friction between the slider and the guide rail of the cable tray forming machine is relatively frequent. Necessary adjustments and corrections should be made, and the lubrication and pipelines of the joints should be checked for good operation.

3. Regularly lubricate the gear parts of the cable tray forming machine: the gear transmission box and internal parts are more likely to be damaged due to frequent operation, and are more likely to become loose.