Downspout Roll Forming Machine

The downspout Roll Forming Machine is to collect the role of the water drop -down pipe product of the roof rainwater, and then the water drop pipe produced by the water pipe machine usually flows the rainwater into the underground pipe. This process is only for water treatment. The visible water drop pipe work is very simple. Our water drop -down pipe molding machine is mainly composed of the opening machine, molding system, cutting equipment, protective device, hydraulic system, control system and workbench. Can make the sewage pipe form a curve to meet the requirements of actual engineering projects.

application

The water drop pipe is mainly collected by the roof water, which is concentrated to the rainwater pipe paved below the ground. This is part of the water drop pipe system, and it is concentrated on the underground rainwater pipe. The rainwater tank or the sewer is a narrow passage or trough, forming a part of the roof system. The system collects and transfers the rainwater flowing from the roof.

In engineering practice, the distance between downspouts (the distance between water flowing in the gutter) is preferably 10-15m. When the calculated spacing is greater than the applicable spacing, downspouts should be set according to the applicable distance; when the calculated spacing is smaller than the applicable spacing, downspouts should be set up according to the calculated spacing. Rainwater outlets should be set according to the maximum water collection area that one standpipe can bear in different drainage methods, and attention should be paid to the amount of water discharged by adjacent buildings to the roof; the location of roof rainwater outlets or downpipes should be consistent with other plans.

Purpose of downspouts: collect rainwater from roofs and lead it to rainwater pipes laid under the ground.

The main materials of metal downpipes are: iron, aluminum, copper, etc. The main shapes are: round, square, rectangular, semicircular, etc. Our company can produce pressing equipment of the above shapes.

The downpipe equipment is fully automatic computer-controlled, automatic processing and production, and is equipped with a raw material uncoiler. The raw materials are placed in the feed port of the machine. The machine drives the plate to automatically roll and process through multiple rollers. After completion, the computer automatically controls the cutting, and the measurement size is accurate; fly Saw cutting, simple and easy to maintain.

Equipment composition: decoiler, lead leveler, shear butt welding machine, storage looper, forming and sizing unit, high frequency equipment, computer flying saw, milling machine, hydraulic testing machine, flaw detection equipment, roller table, Balers, rollers.