18.5 meters High Altitude Roll Forming Machine platform

Lifting height: 18.5 meters

Lifting weight (standard or high configuration/heavy duty): 8 tons

Height of roof panel: 4m--18.5m

Plate materials used for roofs and wall panels: color steel plates, galvanized plates, aluminum plates

The radius range of the high-altitude tile press: ≥4.5mm

Applicable molding machines: all Jiaochi series and roof panel forming machines, motor, reducer drive, hydraulic shearing

Required voltage and power: 380V, 11KW

Thickness of roof and wall panel materials: 0.3mm--1.0mm

Specifications after installing the tile press: Length × width × height: 9.4 meters × 2.3 meters × 4 meters

Hydraulic lifting platform weight (standard/increased type): about 13.5T

Outrigger cylinder: The outer diameter of the hydraulic cylinder is 160mm, the rod diameter is 100mm, it is a key part of safety and has the highest configuration in China.

1 section telescopic cylinder: one section outer diameter 160mm, rod diameter 100mm,

Main arm cylinder: outer diameter 180mm, rod diameter 125mm/, length 3450mm

Lifting platform main hydraulic oil pump: 11 kilowatt double gear internal ram pump with high pressure, good stability and low failure rate

Oil pipe: high-pressure resistant four-layer steel wire first-level explosion-proof oil pipe

Valve block: domestic first-line brand with superior performance

Cylinder lock device: two-way use, with self-locking safety function

Computer control cabinet: stainless steel shell distribution box, touch screen for manual operation, Mitsubishi PLC, 15KW inverter

Height and angle controller: The display shows the actual height, angle and alarm prompt function for illegal operations

Counting system: individual projects and total output can be set

Remote control: The entire vehicle, including outrigger telescopic, support and lifting platform operations, are all operated by remote control and can be operated by mobile phone.

Solenoid valve: safe voltage 24v low voltage, durable, adaptable to complex working conditions

Oil pipe: seamless steel pipe processing

Fuel tank: professionally designed to be anti-theft and anti-splash

Platform specifications: 8.8×2 meters, each type of tile press can be installed arbitrarily

Outriggers: The total width after extension is 5.2m×5.2m. The material is larger, more stable and safer than the same industry.

Welded steel plate material: national standard 355B

Shaft material: tempered and ground 45 steel, chrome plated

Shaft sleeve material: chromium steel material

Slewing bearing (high configuration/standard configuration): a key part of rotation carrying a weight of 20 tons, a key part of safety, Φ2322/1913mm*180mm, the highest configuration in China

Hoisting coil tonnage: Maximum hoisting coil 8T

All steel plates: Q355B

Drag chain: galvanized, steel