Knowledge sharing on the use of high-altitude tile press

The problem of high-altitude pressure tile equipment is a problem that everyone is more concerned about. Security has penetrated into every family and even everyone's heart, and this is true in all walks of life. The problems existing in the high-altitude pressure tile equipment industry cannot be ignored.

1. Manufacturers of high-altitude pressure tile equipment must improve the equipment quality of hydraulic lifting platforms, perform their respective duties, master excellent technology, and resolutely not cut corners, and every link and part must be stable, and company employees must be responsible. Welded joints and bolts must be tight. A moment of negligence and laziness on your part may cause losses.

2. Users must do a good job before use and check whether the high-altitude tile pressure equipment is working properly. Operators must strictly implement the operating procedures. They must fasten their belts and support their legs. Only employees who have been trained to master the equipment operation methods and passed the examination can When you are on duty, you should also pay attention to regular maintenance of the elevator.

3. When the high-altitude tile press is in the elevated state for maintenance, the platform must be fixed on a building of the same height to prevent the platform from accidentally sliding and causing personnel accidents. Personnel who have not been trained by the manufacturer are not allowed to disassemble the equipment without authorization, and the pressure should be relieved before disassembling the hydraulic system.

4. During the hoisting process of the high-altitude tile press, the operator should pay attention to the height of the equipment from the objects above and the surrounding environment to avoid collision with wires or buildings. During high-altitude tile pressing operations, the wind force should not be greater than level 6, and no approach should be allowed within two meters to avoid injury from falling objects.

5. Before being delivered to customers, high-altitude pressure tile equipment will undergo strict installation and debugging to ensure that all aspects of the equipment meet standards. If the pressure valve and other devices are adjusted without authorization, it may cause abnormal operation of the high-altitude pressure tile equipment. Workers are not allowed to adjust the pressure valve at will.

6. Before using the vehicle-mounted high-altitude tile press, you should carefully check whether the hydraulic system and electrical system are leaking or aging, and whether the connection points, solder joints, and screws are firm and whether they are disconnected.

7. When the high-altitude tile press equipment is working, open the outriggers to an appropriate degree, try to make the support area as large as possible, and adjust the height of the outriggers so that the tires of the vehicle-mounted high-altitude tile press are about to leave the ground and reach a horizontal state. Sleepers can be used as underlayment for uneven surfaces.

8. If the high-altitude tile press produces abnormal noise or vibration during operation, it should be stopped immediately for inspection, and the cause can be found and eliminated before continued operation to avoid damage to equipment and personnel.

9. After the high-altitude tile pressure equipment operation is completed, the platform should be moved to the designated location, the power of the equipment should be turned off, and all the legs should be folded before transportation.