Search
banner

Precautions for operating the tile press

writer:Hengfu release time:2023-11-22 14:40:43 Views:76frequency

Those of us who have used a tile press all know that the tile press uses a hydraulic system to form tiles. It all relies on the hydraulic station to provide power for normal operation and work. Therefore, the operation of the hydraulic tile press depends on the hydraulic station. It plays a very important role in the tile press. This is also what we need to pay great attention to when operating the tile press. Once there is a problem in this place, it will affect the normal operation of the tile press and bring adverse effects to our company. The manufacturer is When configuring parts for customers, you must choose products of good quality. We recommend choosing products for most of the core components. Customers must also look clearly at the time of purchase. Hydraulic stations must buy products of good quality. After some customers start up their hydraulic brick machine, the main pump of the hydraulic station makes a lot of noise. We will analyze the reasons:

1. There is residual air in the hydraulic tank. This air will make noise after being sucked into the main pump.

2. Before the trial operation of the new machine, check the operation of the motor, check the forward and reverse rotation, and tighten other parts, not too tight or too loose, and do not let any gaps between them. Friction occurs.

3. The circulating oil circuit of the hydraulic station is blocked, resulting in a delay in the supply of hydraulic oil. When the main oil pump absorbs a large amount of oil, the oil return volume from the oil tank is small, and air takes the opportunity to enter the main pump.

The above reasons should be investigated one by one and the fault should be eliminated. For example, if the main pump of the hydraulic tile press sucks compressed air, you can open the exhaust port on the main pump and discharge the air in the circulation pipeline before running. Equipment problems are often encountered in our production. The important thing is not to be afraid or blame the manufacturer when encountering problems, but to proactively contact the manufacturer to solve the problem. Sometimes the fault is caused by workers' mistakes, so production training is important. To persist, we must also pay attention to maintenance when using the tile press. We should ignore it when it is not in use. We must perform regular maintenance and inspections, and add lubricating oil to areas that need good friction.


Copyright © 2023-2024 https://www.hengfumachinery.com All Rights Reserved Dongguang County Hengfu Roll Forming Machinery Co.,Ltd

contact
Contact us contact
Contact Form
  •  Click Replace